Optimized braces for the treatment of adolescent idiopathic scoliosis: A study protocol of a prospective randomised controlled trial.

INTRODUCTION: Adolescent Idiopathic Scoliosis (AIS) is a 3D deformity of the spine that affects 3% of the adolescent population. Conservative treatments like bracing aim to halt the progression of the curve to the surgical threshold. Computer-aided design and manufacturing (CAD/CAM) methods for brace design and manufacturing are becoming increasingly used. Linked to CAD/CAM and 3D radiographic reconstruction techniques, we developed a finite element model (FEM) enabling to simulate the brace effectiveness before its fabrication, as well as a semi-automatic design processes. The objective of this randomized controlled trial is to compare and validate such FEM semi-automatic algorithm used to design nighttime Providence-type braces. METHODS AND ANALYSIS: Fifty-eight patients with AIS aged between 10 to 16-years and skeletally immature will be recruited. At the delivery stage, all patients will receive both a Providence-type brace optimized by the semi-automatic algorithm leveraging a patient-specific FEM (Test) and a conventional Providence-type brace (Control), both designed using CAD/CAM methods. Biplanar radiographs will be taken for each patient with both braces in a randomized crossover approach to evaluate immediate correction. Patients will then be randomized to keep either the Test or Control brace as prescribed with a renewal if necessary, and will be followed over two years. The primary outcome will be the change in Cobb angle of the main curve after two years. Secondary outcomes will be brace failure rate, quality of life (QoL) and immediate in-brace correction. This is a single-centre study, double-blinded (participant and outcome assessor) randomized controlled trial (RCT). TRIAL REGISTRATION NUMBER: ClinicalTrials.gov: NCT05001568.

Automated design of nighttime braces for adolescent idiopathic scoliosis with global shape optimization using a patient-specific finite element model.

Adolescent idiopathic scoliosis is a complex three-dimensional deformity of the spine, the moderate forms of which require treatment with an orthopedic brace. Existing brace design approaches rely mainly on empirical manual processes, vary considerably depending on the training and expertise of the orthotist, and do not always guarantee biomechanical effectiveness. To address these issues, we propose a new automated design method for creating bespoke nighttime braces requiring virtually no user input in the process. From standard biplanar radiographs and a surface topography torso scan, a personalized finite element model of the patient is created to simulate bracing and the resulting spine growth over the treatment period. Then, the topography of an automatically generated brace is modified and simulated over hundreds of iterations by a clinically driven optimization algorithm aiming to improve brace immediate and long-term effectiveness while respecting safety thresholds. This method was clinically tested on 17 patients prospectively recruited. The optimized braces showed a highly effective immediate correction of the thoracic and lumbar curves (70% and 90% respectively), with no modifications needed to fit the braces onto the patients. In addition, the simulated lumbar lordosis and thoracic apical rotation were improved by 5° ± 3° and 2° ± 3° respectively. Our approach distinguishes from traditional brace design as it relies solely on biomechanically validated models of the patient's digital twin and a design strategy that is entirely abstracted from empirical knowledge. It provides clinicians with an efficient way to create effective braces without relying on lengthy manual processes and variable orthotist expertise to ensure a proper correction of scoliosis.

Pre-operative parameters influencing vertebral body tethering outcomes: patient's characteristics play an important role in determining the outcomes at a minimum of 2 years post-op.

PURPOSE: The aim of this study is to determine preoperative predictors of good radiographic outcomes in VBT patients at a minimum 2-year follow-up. METHODS: From a single-center dataset, we reviewed patients who underwent VBT from January 2014 to November 2018. Data analysis included age, gender, Risser grade and biometric data. Radiographically, maximum Cobb angle, C-DAR and apical vertebral and disc wedging were measured preop and at a minimum 2-year follow-up. Patients were divided into two cohorts following two different outcome measures: (1) vertebral growth modulation, those patients that growth modulated or corrected ≥ 5° and those who did not; and (2) Maximum Cobb angle at 2 years, < and ≥ 40°. Student T and Chi2 tests were used for comparison and a multiple linear correlation test was implemented between statistically significant variables. RESULTS: 79 patients were recruited. 26 patients (33%) did growth modulate their spine at 2-year follow-up. These patients were significantly younger, and more skeletally immature with less height (147 cm vs 155 cm; p < 0.0001), weight (38 kg vs. 45 kg; p = 0.0009) and BMI (17 vs 18.8; p = 0.0229) as those who did not. Multiple linear regression model with these variables resulted in a moderate correlation (r2 = 0.234). 67 patients (85%) finished at a 2-year follow-up with a maximum Cobb angle < 40°. These patients were also younger and skeletally immature. We found significant differences in outcome 2 regarding the average preoperative maximum Cobb angle (48.5° ± 9.5 vs. 59.1° ± 10), average C-DAR (7 ± 1.5 vs. 8.5 ± 2.1), average apical vertebral wedging (6.5° vs. 8.3°), average vertebral/disc wedging ratio (1.5 vs. 2.4) and the average immediate postoperative Cobb angle (25° vs. 38°). These variables predicted a 36% of the variation in final Cobb angle measurement at a 2-year follow-up (r2 = 0.362). CONCLUSION: Curve severity determined by a preoperative C-DAR, preoperative Cobb angles and immediate postoperative Cobb angle are significantly related to curves < 40° at a minimum 2-year follow-up, while the potential to growth modulate the spine is more dependent on skeletal maturity, lower body weight and lower BMI. These patients' characteristics should be considered preoperatively.

Differential Regulation of POC5 by ERα in Human Normal and Scoliotic Cells.

Adolescent idiopathic scoliosis (AIS) is a complex three-dimensional spinal deformity. The incidence of AIS in females is 8.4 times higher than in males. Several hypotheses on the role of estrogen have been postulated for the progression of AIS. Recently, Centriolar protein gene POC5 (POC5) was identified as a causative gene of AIS. POC5 is a centriolar protein that is important for cell cycle progression and centriole elongation. However, the hormonal regulation of POC5 remains to be determined. Here, we identify POC5 as an estrogen-responsive gene under the regulation of estrogen receptor ERα in normal osteoblasts (NOBs) and other ERα-positive cells. Using promoter activity, gene, and protein expression assays, we found that the POC5 gene was upregulated by the treatment of osteoblasts with estradiol (E2) through direct genomic signaling. We observed different effects of E2 in NOBs and mutant POC5A429V AIS osteoblasts. Using promoter assays, we identified an estrogen response element (ERE) in the proximal promoter of POC5, which conferred estrogen responsiveness through ERα. The recruitment of ERα to the ERE of the POC5 promoter was also potentiated by estrogen. Collectively, these findings suggest that estrogen is an etiological factor in scoliosis through the deregulation of POC5.

Is quality of life after surgery for adolescent idiopathic scoliosis affected by the presence of a concomitant low-grade isthmic spondylolisthesis non-surgically treated? A retrospective cohort study.

PURPOSE: The HRQoL after surgery for adolescent idiopathic scoliosis (AIS) is not affected by the presence of concomitant isthmic spondylolisthesis non-surgically treated. Improvement in QoL after surgery was similar for AIS patients with and without concomitant spondylolisthesis. The purpose is to compare preoperative and postoperative Health-Related Quality of Life (HRQoL) scores in operated AIS patients with and without concomitant isthmic spondylolisthesis. METHODS: A retrospective study of a prospective cohort of 464 individuals undergoing AIS surgery between 2008 and 2018 was performed. All patients undergoing surgery for AIS with a minimum 2-year follow-up were included. We excluded patients with prior or concomitant surgery for spondylolisthesis. HRQoL scores were measured using the SRS-22 questionnaire. Comparisons were performed between AIS patients with versus without concomitant spondylolisthesis treated non-surgically. RESULTS: AIS surgery was performed for 36 patients (15.2 ± 2.5 y.o) with concomitant isthmic spondylolisthesis, and 428 patients (15.5 ± 2.4 y.o) without concomitant spondylolisthesis. The two groups were similar in terms of age, sex, preoperative and postoperative Cobb angles. Preoperative and postoperative HRQoL scores were similar between the two groups. HRQoL improved significantly for all domains in both groups, except for pain in patients with spondylolisthesis. There was no need for surgical treatment of the spondylolisthesis and no slip progression during the follow-up duration after AIS surgery. CONCLUSION: Patients undergoing surgical treatment of AIS with non-surgical management of a concomitant isthmic grade I spondylolisthesis can expect improvement in HRQoL scores, similar to that observed in patients without concomitant spondylolisthesis.

Cross-cultural French-Canadian adaptation and psychometric assessment of the Italian Spine Youth Quality of Life (ISYQOL) questionnaire.

BACKGROUND CONTEXT: Idiopathic scoliosis (IS) can significantly alter the quality of life of adolescents. Some of the available questionnaires in French measuring the quality of life in this population show weak psychometric properties. The newly developed Italian Spine Youth Quality of Life (ISYQOL) questionnaire promises better properties. PURPOSE: To provide a French-Canadian version of the ISYQOL and to verify its psychometric characteristics. STUDY DESIGN: Prospective validation of a cross-cultural adaptation of the ISYQOL questionnaire. PATIENT SAMPLE: A total of 111 participants with idiopathic scoliosis (77.5% female, 10-18 years old, mean Cobb angle=28°) were included in the study. OUTCOME MEASURE: The French-Canadian version of the Italian Spine Youth Quality of Life (ISYQOL-F) questionnaire. MATERIALS AND METHODS: The ISYQOL was translated into French using a forward-backward approach. We then verified the understanding of the translated items with two scoliosis experts and 10 adolescents. Afterward, 111 adolescents with IS were recruited by convenience at the scoliosis clinic and they completed the ISYQOL on three occasions (before seeing the specialist, 1 week, and 2 weeks after). Cronbach's alpha, intra-class (ICC), and Pearson correlation coefficients were used to respectively determine internal consistency, test-retest reliability, and concurrent validity with the SRS-22r and SF-12. The standard error of measurement (SEM) and 95% confidence minimal detectable change (MDC95) were also calculated. The ceiling effect was quantified as the percentage of participants who scored the maximum on ISYQOL-F. RESULTS: The ISYQOL-F showed good internal consistency with a Cronbach alpha of 0.81 and 0.85 respectively for items 1-13 (n=55; ISYQOL-F mean score ± SD = 63.9±13.5) and 1-20 (n=56; ISYQOL-F mean score ± SD=60.7±10.3). Test-retest reliability was excellent (ICC3,1=0.94). The SEM is 3.1 and the MDC95 is 8.6. Correlations between ISYQOL-F and SRS-22r and between ISYQOL-F and SF-12 were moderate for total scores (r=0.56 and 0.50 respectively, p<.001), but low for each domain (between 0.20 and 0.48, p<.05). No significant ceiling effects were observed for ISYQOL-F (≤2.5%). In contrast, ceiling effects ranged from 3.6% to 30.6% for SRS-22r and 0%-68.5% for SF-12. CONCLUSIONS: The internal consistency and reliability of ISYQOL-F are good. The total score correlates moderately with the SRS-22r and SF-12. Unlike SRS-22r, the ISYQOL-F does not appear to have a ceiling effect. The ISYQOL-F may thus be suitable to assess quality of life in a population of French-Canadian adolescents with IS.

A Dangerous Curve: Impact of the COVID-19 Pandemic on Brace Treatment in Adolescent Idiopathic Scoliosis.

STUDY DESIGN: Observational Cohort study. OBJECTIVES: We aim to document the abandon and irregular compliance rate towards brace treatment during the COVID-19 pandemic and its impact on AIS progression. METHODS: We reviewed a database of AIS patients recruited between March and September 2020. We included AIS patients under brace treatment according to SRS criteria. The patients were divided in 2 cohorts: those with self-reported Good-Compliance (GC) to treatment and those who had a Bad-Compliance (BC). Data analysis included biometric and radiographic data at first visit and last follow-up and percentage of progression. Unpaired student-t tests and Chi2 were used for comparison. RESULTS: 152 patients met inclusion criteria. 89 patients (age:12.1y.o.±1.4) reported good adherence to treatment, while 63 patients (age:12.7y.o.±1.8) were not compliant. Within the BC group, 18 patients reported irregular brace wear, while 45 had completely abandoned treatment (abandon rate of 29%). The GC cohort started treatment with a mean main thoracic (MT) curve of 26° and finished with 27°. The mean difference between measurements was +.65°±7.5; mean progression rate was -4.6%. However, the BC cohort started with a mean MT curve of 27° and finished with 32°, with a mean increase of +5°±8 and a mean progression rate of -13%. The differences between the 2 cohorts were statistically significant (P = .0002). Six patients from the BC group progressed and were offered surgery. CONCLUSION: The abandon rate of brace treatment in AIS significantly increased during the first wave of COVID-19 pandemic. Patients who voluntarily discontinued treatment had significant increases in curve progression and surgical indication rates. LEVEL OF EVIDENCE: III.

Biomechanical Effects of Thoracolumbosacral Orthosis Design Features on 3D Correction in Adolescent Idiopathic Scoliosis: A Comprehensive Multicenter Study.

STUDY DESIGN: Multicenter numerical study. OBJECTIVE: To biomechanically analyze and compare various passive correction features of braces, designed by several centers with diverse practices, for three-dimensional (3D) correction of adolescent idiopathic scoliosis. SUMMARY OF BACKGROUND DATA: A wide variety of brace designs exist, but their biomechanical effectiveness is not clearly understood. Many studies have reported brace treatment correction potential with various degrees of control, making the objective comparison of correction mechanisms difficult. A Finite Element Model simulating the immediate in-brace corrective effects has been developed and allows to comprehensively assess the biomechanics of different brace designs. METHODS: Expert clinical teams (one orthotist and one orthopedist) from six centers in five countries participated in the study. For six scoliosis cases with different curve types respecting SRS criteria, the teams designed two braces according to their treatment protocol. Finite Element Model simulations were performed to compute immediate in-brace 3D correction and skin-to-brace pressures. All braces were randomized and labeled according to 21 design features derived from Society on Scoliosis Orthopaedic and Rehabilitation Treatment proposed descriptors, including positioning of pressure points, orientation of push vectors, and sagittal design. Simulated in brace 3D corrections were compared for each design feature class using ANOVAs and linear regressions (significance P ≤ 0.05). RESULTS: Seventy-two braces were tested, with significant variety in the design approaches. Pressure points at the apical vertebra level corrected the main thoracic curve better than more caudal locations. Braces with ventral support flattened the lumbar lordosis. Lateral and ventral skin-to-brace pressures were correlated with changes in thoracolumbar/lumbar Cobb and lumbar lordosis (r =- 0.53, r = - 0.54). Upper straps positioned above T10 corrected the main thoracic Cobb better than those placed lower. CONCLUSIONS: The corrective features of various scoliosis braces were objectively compared in a systematic approach with minimal biases and variability in test parameters, providing a better biomechanical understanding of individual passive mechanisms' contribution to 3D correction.

3D Radiological Outcomes and Quality of Life of Patients With Moderate Idiopathic Scoliosis Treated With Anterior Vertebral Growth Modulation Versus Bracing: Two-Year Follow-up.

STUDY DESIGN: Observational cohort study. OBJECTIVE: To test the hypothesis that anterior vertebral body growth modulation (AVBGM) achieves 3D deformity correction after 2-year follow-up while brace treatment limits curve progression for moderate idiopathic scoliosis (30-50°). SUMMARY OF BACKGROUND DATA: For idiopathic scoliosis, bracing and AVBGM have overlapping indications in skeletally immature patients with moderate scoliosis curve angles, creating a grey zone in clinical practice between them. The relative 3D deformity control performance over a 2-year period between these fusionless treatments is still uncertain. METHODS: A retrospective review of a prospective idiopathic scoliosis patients database, recruited between 2013 and 2018 was performed. Inclusion criteria were skeletally immature patients (Risser 0-2), with Cobb angles between 30° and 50° and a 2-year follow-up after bracing or AVBGM. 3D radiological parameters and health related quality of life (HRQoL) scores were evaluated. Unpaired t test was used. RESULTS: Thirty nine patients (12.7 ± 1.3 y.o.) with Cobb angles more than or equal to 30° treated with brace and 41 patients (11.8 ± 1.2 y.o.) with presenting Cobb angles less than or equal to 50° who received AVBGM were reviewed. The statistical analysis of 3D deformity measurements showed that at 2-year follow-up, only the 3D spine length and both sides apical vertebral heights changed significantly with brace treatment. While AVBGM treatment achieved statistically significant correction differences in thoracic and lumbar Cobb angles, TrueKyphosis, 3D spine length, and selective left apical vertebral height ( P < 0.05). 35% of brace patients had a curve progression of more than 5° at final follow-up while it was 0% for AVBGM. HRQoL assessment showed no statistically significant differences between pre and post SRS-22 total scores for each group ( P > 0.05). CONCLUSION: Even though these two cohorts are not fully comparable, bracing seems to control progression for a significant portion of patients with moderate scoliosis curves, while AVBGM significantly corrected and maintained 3D deformity parameters at 2-year follow-up.

Prevalence of POC5 Coding Variants in French-Canadian and British AIS Cohort.

Adolescent idiopathic scoliosis (AIS) is a complex common disorder of multifactorial etiology defined by a deviation of the spine in three dimensions that affects approximately 2% to 4% of adolescents. Risk factors include other affected family members, suggesting a genetic component to the disease. The POC5 gene was identified as one of the first ciliary candidate genes for AIS, as three variants were identified in large families with multiple members affected with idiopathic scoliosis. To assess the prevalence of p.(A429V), p.(A446T), and p.(A455P) POC5 variants in patients with AIS, we used next-generation sequencing in our cohort of French-Canadian and British families and sporadic cases. Our study highlighted a prevalence of 13% for POC5 variants, 7.5% for p.(A429V), and 6.4% for p.(A446T). These results suggest a higher prevalence of the aforementioned POC5 coding variants in patients with AIS compared to the general population.

Automatic bone maturity grading from EOS radiographs in Adolescent Idiopathic Scoliosis.

Adolescent Idiopathic Scoliosis (AIS) is a deformation of the spine and it is routinely diagnosed using posteroanterior and lateral radiographs. The Risser sign used in skeletal maturity assessment is commonly accepted in AIS patient's management. However, the Risser sign is subject to inter-observer variability and it relies mainly on the observation of ossification on the iliac crests. This study proposes a new machine-learning-based approach for Risser sign skeletal maturity assessment using EOS radiographs. Regions of interest including right and left humeral heads; left and right femoral heads; and pelvis are extracted from the radiographs. First, a total of 24 image features is extracted from EOS radiographs using a ResNet101-type convolutional neural network (CNN), pre-trained from the ImageNet database. Then, a support vector machine (SVM) algorithm is used for the final Risser sign classification. The experimental results demonstrate an overall accuracy of 84%, 78%, and 80% respectively for iliac crests, humeral heads, and femoral heads. Class activation maps using Grad-CAM were also investigated to understand the features of our model. In conclusion, our machine learning approach is promising to incorporate a large number of image features for different regions of interest to improve Risser grading for skeletal maturity. Automatic classification could contribute to the management of AIS patients.

Braces Designed Using CAD/CAM Combined or Not With Finite Element Modeling Lead to Effective Treatment and Quality of Life After 2 Years: A Randomized Controlled Trial.

STUDY DESIGN: Single-center prospective randomized controlled trial. OBJECTIVE: The aim of this study was to assess the computer-aided design/manufacturing (CAD/CAM) brace design approach, with and without added finite element modeling (FEM) simulations, after 2 years in terms of clinical outcomes, 3D correction, compliance, and quality of life (QoL). SUMMARY OF BACKGROUND DATA: .: Previous studies demonstrated that braces designed using a combination of CAD/CAM and FEM induced promising in-brace corrections, were lighter, thinner, and covered less trunk surface. Yet, their long-term impact on treatment quality has not been evaluated. METHODS: One-hundred twenty adolescent idiopathic scoliosis patients were recruited following Scoliosis Research Society standardized criteria for brace treatment; 61 patients in the first subgroup (CAD) were given braces designed using CAD/CAM; 59 in the second subgroup (CAD-FEM) received braces additionally simulated and refined using a patient-specific FEM built from 3D reconstructions of the spine, rib cage and pelvis. Main thoracic (MT) and thoraco-lumbar/lumbar (TL/L) Cobb angles, sagittal curves, and apical rotations were compared at the initial visit and after 2 years. Patient compliance and QoL were tracked respectively by using embedded temperature sensors and SRS-22r questionnaires. RESULTS: Forty-four patients with CAD-FEM braces and 50 with CAD braces completed the study. Average in-brace correction was 9° MT (8° CAD-FEM, 10° CAD, P = 0.054) and 12° TL/L (same for both subgroups, P = 0.91). Out-of-brace 2-year progression from initial deformity was <4° for all 3D measurements. Sixty-six percent of all cases (30 CAD-FEM, 35 CAD) met the ≤5° curve progression criterion, 83% (38 CAD-FEM, 43 CAD) stayed <45°, and 6% (5 CAD-FEM, 1 CAD) underwent fusion surgery. 3D correction, compliance, and QoL were not significantly different between both subgroups (P > 0.05). CONCLUSION: After 2 years, patients with braces designed using CAD/CAM with/without FEM had satisfying clinical outcomes (compared to the BrAIST study), 3D corrections, compliance and QoL. A more comprehensive optimization of brace treatment remains to be accomplished. LEVEL OF EVIDENCE: 2.

Towards a new 3D classification for adolescent idiopathic scoliosis.

STUDY DESIGN: Retrospective analysis of consecutive cases. OBJECTIVES: To identify clinically relevant three-dimensional (3D) sub-groups for adolescent idiopathic scoliosis (AIS). Classifications for AIS are developed to assist surgeons in surgical planning and therapeutic management. However, current systems are based on two-dimensional (2D) parameters that do not completely describe the 3D deformity. Hence, variations in surgical results based on pre-operative 2D classifications may be attributed to the lack of 3D description. METHODS: Subjects from a multicenter database of AIS patients were included in this study. All patients had bi-planar radiographs and 3D reconstruction of the entire spine. A clustering algorithm based on fuzzy c-means was utilized to identify sub-groups based on the following ten parameters measured on 3D reconstructions of the spine: Cobb angle, orientation of the plane of maximum curvature of the proximal thoracic, mid-thoracic (MT) and thoracolumbar (TLL) levels, axial rotation of the apical vertebra of the MT and TLL segments, T4-T12 thoracic kyphosis, and L1-S1 lumbar lordosis. Da Vinci views were also generated and analyzed for each patient in the study. A panel of four experienced spine surgeons from the SRS 3D Scoliosis Committee reviewed and evaluated each group to determine if cluster groups were clinically distinct from each other. RESULTS: The clustering algorithm was able to detect 11 sub-groups. The population size for each cluster varied from 11 to 290. Statistically significant differences were seen between the parameters for each group. Four spine surgeons reviewed the three most representative cases of each group and unanimously agreed that each cluster group represents a sub-group that was not defined in current classifications. CONCLUSIONS: This study presents a new method of classifying AIS based on a fuzzy clustering algorithm using parameters describing the 3D characteristics of the deformity. Further clinical validation is needed to confirm the usefulness of this classification system. LEVEL OF EVIDENCE: IV.

Predicting lowest hemoglobin level and risk of blood transfusion in spinal fusion surgery for adolescent idiopathic scoliosis.

PURPOSE: The aim of this study was to evaluate the factors associated with timing of lowest hemoglobin (Hb) level and the need for postoperative blood transfusion in posterior spinal fusion for adolescent idiopathic scoliosis. METHODS: We conducted a retrospective review of all adolescent scoliosis patients undergoing posterior spinal fusion at our institution, 2002-2014. Surgery consisted of segmental pedicle screw fixation using multi-level pedicle screws. Blood-saving techniques were used in all patients. Data included Cobb angle, pre- and postoperative Hb levels, preoperative autologous blood donation (PABD), surgery duration, and allogeneic or autologous transfusion. We used linear and logistic regressions for statistical analysis. RESULTS: There were 456 patients (402 female, 54 male), mean age 16 ± 5 years. Lowest Hb was observed on postoperative Days 2 (32.2%) and 3 (33.3%); 45.1% of postoperative transfusions occurred on Day 2. One hundred and eighty-eight (41%) patients who provided PABD had significantly lower preoperative Hb and received more transfusions intraoperatively (22.6% vs. 5.2%) and postoperatively (20% vs. 6.3%) than others. Probability of transfusion increased 49.6 (95% CI 17.40-141.37) times with preoperative Hb < 11 g/dL as compared to preoperative Hb > 14 g/dL. Probability of transfusion increased 4.3- and 9.8-fold when surgery duration exceeded 5 and 6 h, respectively. Probability of transfusion increased 3.3- and 5.3-fold with Cobb angle > 70° and 80°, respectively. CONCLUSIONS: We identified clear patient-specific perioperative parameters that affect risk of perioperative blood transfusion, including Cobb angle, PABD and preoperative Hb. Hb measurement beyond postoperative Day 3 is considered unnecessary unless clinically indicated. These slides can be retrieved under Electronic Supplementary Material.

Adolescent idiopathic scoliosis associated POC5 mutation impairs cell cycle, cilia length and centrosome protein interactions.

Adolescent Idiopathic Scoliosis (AIS) is a spinal deformity that affects approximately 3 percent of human adolescents. Although the etiology and molecular basis of AIS is unclear, several genes such as POC5 have been identified as possible causes of the condition. In order to understand the role of POC5 in the pathogenesis of AIS, we investigated the subcellular localization of POC5 in cilia of cells over-expressing either the wild type (wt) or an AIS-related POC5 variant POC5A429V. Mutation of POC5 was found to alter its subcellular localization and to induce ciliary retraction. Furthermore, we observed an impaired cell-cycle progression with the accumulation of cells in the S-phase in cells expressing POC5A429V. Using immunoprecipitation coupled to mass spectrometry, we identified specific protein interaction partners of POC5, most of which were components of cilia and cytoskeleton. Several of these interactions were altered upon mutation of POC5. Altogether, our results demonstrate major cellular alterations, disturbances in centrosome protein interactions and cilia retraction in cells expressing an AIS-related POC5 mutation. Our study suggests that defects in centrosomes and cilia may underlie AIS pathogenesis.

Prevalence and natural history of scoliosis and associated congenital vertebral anomalies in patients operated for esophageal atresia with or without tracheoesophageal fistula.

BACKGROUND: Scoliosis has been reported after repair of esophageal atresia with or without tracheoesophageal fistula (EA-TEF). This study aims to investigate the prevalence and natural history of scoliosis and associated congenital vertebral anomalies in patients operated for EATEF. METHODS: A retrospective review of patients operated for EA-TEF with radiological examination for the presence of scoliosis or associated spine congenital anomalies was done on 106 patients (ages 5-19 years). RESULTS: Scoliosis was found in 53 patients (49%) for which 46 of these were in the thoracic region and 33 were right-thoracic curves. After a follow-up ranging from 5 to 14 years, four patients (3.7%) out of 106 were operated for scoliosis. Right-sided thoracotomy (RST) was the identifiable risk factor for scoliosis development; all patients with scoliosis had their EA repaired through RST. Congenital vertebral anomalies were found in 8 of those patients (7.5%). After a median follow-up of 6.5 years, no patients progressed enough to require operation. CONCLUSION: Scoliosis affects one of every two patients operated for EA; it may progress to the indication of surgery. RST was the identifiable risk factor for scoliosis development.

The importance of proximal femoral angle on sagittal balance and quality of life in children and adolescents with high-grade lumbosacral spondylolisthesis.

PURPOSE: Previous studies did not specifically assess the influence of proximal femoral angle (PFA) on sagittal balance in high-grade spondylolisthesis (HGS). In addition, the relationship between PFA and quality of life (QOL) remains unknown. This study determines if increased PFA is associated with decreased QOL and sagittal balance in lumbosacral HGS. METHODS: This retrospective case-control study was performed on a cohort of 56 normal subjects and 42 patients with HGS. Initially, PFA was measured twice by 3 raters in a random subset of 30 subjects (15 normal and 15 HGS) to determine the intrarater and interrater reliability of the measurement technique. PFA was then measured for all subjects. For the 42 patients with HGS, QOL was assessed from the SRS-22 questionnaire, in addition to the evaluation of the spino-pelvic balance. RESULTS: The intrarater and interrater intraclass correlation coefficients for the measurement of PFA were, respectively, 0.951 and 0.958, suggesting excellent reliability. PFA was significantly higher in HGS patients (8.3° ± 6.7°; range - 5° to 24°) when compared to normal subjects (3.0° ± 3.1°; range - 6° to 10°). The PFA in HGS was 5.6° ± 5.6° (range - 5° to 18°), 8.9° ± 6.7° (range - 2° to 24°), and 14.0° ± 6.0° (range 7°-23°) in type 4 (balanced pelvis), type 5 (unbalanced pelvis/balanced spine), and type 6 (unbalanced pelvis and spine) subjects, respectively. There were, respectively, 23.5% (4/17), 26.3% (5/19), and 83.3% (5/6) of HGS patients with abnormal PFA ≥ 10° in type 4, type 5, and type 6 subgroups. Increased PFA in HGS patients was related with deteriorating self-image, pain, function and total SRS-22 score, as well as with increasing pelvic tilt and decreasing sacral slope. CONCLUSION: A PFA ≥ 10° is proposed as a criterion to define abnormal PFA. PFA was increased in HGS and increased along with deteriorating sagittal balance and QOL. PFA is a clinically relevant parameter of sagittal balance, and can be useful in the evaluation and management of patients with HGS.

Early Impact of Postoperative Bracing on Pain and Quality of Life After Posterior Instrumented Fusion for Lumbar Degenerative Conditions: A Randomized Trial.

STUDY DESIGN: A randomized controlled trial. OBJECTIVE: To investigate whether bracing after posterior spinal instrumented fusion (PSIF) can improve pain relief and quality of life (QoL) 6 weeks and 3 months postoperatively. SUMMARY OF BACKGROUND DATA: Braces are commonly prescribed after PSIF in patients with lumbar degenerative conditions with the aim of improving pain relief and QoL. However, there is a lack of evidence on the indication for postoperative bracing, as surgeons use braces mainly based on their experience and training. METHODS: A randomized blinded and controlled trial of 43 patients with PSIF for lumbar degenerative conditions were recruited. The caregivers were blinded but not the orthotist in the present study. There were 25 patients in the brace group and 18 patients in the control group with similar baseline characteristics. All patients completed the Oswestry Disability Index (ODI), the short form (SF)-12v2 General Health Survey and Visual Analog Scale (VAS) for back pain preoperatively, at 6 weeks and 3 months follow-up. Wilcoxon-Mann-Whitney test and a level of significance of 0.05 were used for statistical analyses. RESULTS: Both groups had comparable demographic characteristics, and preoperative SF-12v2, ODI, and VAS scores. The ODI, SF-12v2, and VAS for back pain were improved in comparison to preoperative scores. The improvement was significant at 3 months follow-up regarding ODI and VAS for both groups and significant only for the control group regarding SF-12v2 scores. The improvement in ODI, SF-12v2, and VAS was significantly greater for control group at 3 months postoperatively. Moreover, larger proportion of patients in the control group reached minimum clinically important difference as compared to brace group at 6 weeks and 3 months. CONCLUSION: Postoperative bracing did not result in better improvement in QoL or pain relief up to 3 months after PSIF in patients with lumbar degenerative conditions. LEVEL OF EVIDENCE: 1.

3D correction of AIS in braces designed using CAD/CAM and FEM: a randomized controlled trial.

BACKGROUND: Recent studies showed that finite element model (FEM) combined to CAD/CAM improves the design of braces for the conservative treatment of adolescent idiopathic scoliosis (AIS), using 2D measurements from in-brace radiographs. We aim to assess the immediate effectiveness on curve correction in all three planes of braces designed using CAD/CAM and numerical simulation compared to braces designed with CAD/CAM only. METHODS: SRS standardized criteria for bracing were followed to recruit 48 AIS patients who were randomized into two groups. For both groups, 3D reconstructions of the spine and patient's torso, respectively built from bi-planar radiographs and surface topography, were obtained and braces were designed using the CAD/CAM approach. For the test group, 3D reconstructions of the spine and patient's torso were additionally used to generate a personalized FEM to simulate and iteratively improve the brace design with the objective of curve correction maximization in three planes and brace material minimization. RESULTS: For the control group (CtrlBraces), average Cobb angle prior to bracing was 29° (thoracic, T) and 25° (lumbar, L) with the planes of maximal curvature (PMC) respectively oriented at 63° and 57° on average with respect to the sagittal plane. Average apical axial rotation prior to bracing was 7° (T) and 9° (L). For the test group (FEMBraces), initial Cobb angles were 33° (T) and 28° (L) with the PMC at 68° (T) and 56° (L) and average apical axial rotation prior to bracing at 9° (T and L). On average, FEMBraces were 50% thinner and had 20% less covering surface than CtrlBraces while reducing T and L curves by 47 and 48%, respectively, compared to 25 and 26% for CtrlBraces. FEMBraces corrected apical axial rotation by 46% compared to 30% for CtrlBraces. CONCLUSION: The combination of numerical simulation and CAD/CAM approach allowed designing more efficient braces in all three planes, with the advantages of being lighter than standard CAD/CAM braces. Bracing in AIS may be improved in 3D by the use of this simulation platform. This study is ongoing to recruit more cases and to analyze the long-term effect of bracing. TRIAL REGISTRATION: ClinicalTrials.gov, NCT02285621.

Assessment of Breast Asymmetry in Adolescent Idiopathic Scoliosis Using an Automated 3D Body Surface Measurement Technique.

STUDY DESIGN: Cohort study. OBJECTIVES: To assess breast asymmetry (BA) directly with 3D surface imaging and to validate it using MRI values from a cohort of 30 patients with significant adolescent idiopathic scoliosis (AIS). Also, to study the influence of posture (prone vs standing) on BA using the automated method on both modalities. SUMMARY OF BACKGROUND DATA: BA is a common concern in young female patients with AIS. In a previous study using MRI, we found that the majority of patients with significant AIS experienced BA of up to 21% in addition to their chest wall deformity. MRI is costly and not always readily available. 3D surface topography, which offers fast and reliable breast acquisitions without radiation or distortion of the body surface, is an alternative method in the clinical setting. METHODS: Thirty patients with AIS were enrolled in the study on the basis of their thoracic curvature, skeletal and breast maturity, without regard to their perception of their BA. Each patient underwent two imaging studies of their torso: a 3D trunk surface topography and a breast MRI. An automated breast volume measuring method was proposed using a program developed with Matlab programming. RESULTS: Strong correlations were obtained when comparing the proposed method to the MRI on the left breast volumes (LBV) (r = 0.747), the right breast volumes (RBV) (r = 0.805) and the BA (r = 0.614). Using the same method on both imaging modalities also yielded strong correlation coefficients on the LBV (r = 0.896), the RBV (r = 0.939) and the BA (r = 0.709). CONCLUSIONS: The proposed 3D body surface automated measurement technique is feasible clinically and correlates very well with breast volumes measured using MRI. Additionally, breast volumes remain comparable despite being measured in different body positions (standing and prone) in a young cohort of AIS patients. LEVEL OF EVIDENCE: Level IV.